In-Sight Explorer EasyBuilder

The In-Sight EasyBuilder Standard product class gives new In-Sight users an overview of the hardware and software used by In-Sight Vision Systems. With the focus on getting the most from the In-Sight Explorer EasyBuilder interface, users learn how to walk through the process of setting up a vision application using EasyBuilder best practices.

The duration of this course is 1 day.

Part numbers and prices per person*

Americas

Europe

* If you need a formal quote based on your specific needs, please reach out to your local COGNEX sales representative

At the end of this training event, participants will be able to:

• Demonstrate how to connect the In-Sight camera to the network
• Capture an image with the camera
• Calibrate the image using real-world measurements
• Utilize Locator Tools to find parts
• Inspect parts using various tools such as Presence/Absence, Measurement, Counting, and ID
• Utilize the Image Filter Tools in the job
• Configure a Discrete Input and a Discrete Output line
• Utilize the proper network communications for the job
• Utilize various tools available to deploy the system, such as backing up and restoring cameras
• Apply the fundamentals of lighting and optics to gain a good image of the part
• Troubleshoot when the camera/network/tools are not working as expected

1. Hardware and Connections
2. Software Overview and Image Acquisition
3. Locator Tools
4. Inspection Tools
5. Identification and Image Filter Tools
6. Digital I/O
7. Network Communication
8. Deployment
9. Lighting and Optics
10. Troubleshooting
11. Final Project